Det ultimative huskespil

Placeret på 2020-04-30

Knapperne

For at styre knapperne skal vi tilføje et stykke kode, der ligner koden til LED'erne. Den største forskel er, at vi nu arbejder med knapper i stedet for lysdioder.

        aantal = aantal+1; 
      }
      if (buttonCheck == 5){  // <----- vanaf hier
        aantal = 1;
        while (aantal < lengte){
            buttonState1 = digitalRead(BUTTON_PIN1); // <-updaten van de pinstatus
            buttonState2 = digitalRead(BUTTON_PIN2);
            buttonState3 = digitalRead(BUTTON_PIN3);
            
            if(buttonState1 == LOW){       
              digitalWrite(LED_PIN1, HIGH);
                aantal = aantal + 1;
                delay(500);
                  
            else if(buttonState2 == LOW){       
              digitalWrite(LED_PIN2, HIGH);
              aantal = aantal + 1;
              delay(500);
            }
            else if(buttonState3 == LOW){        
              digitalWrite(LED_PIN3, HIGH);
              aantal = aantal + 1;
              delay(500);
            }
            else{                           
              digitalWrite(LED_PIN1, LOW); 
              digitalWrite(LED_PIN2, LOW);
              digitalWrite(LED_PIN3, LOW);
            }
            
        }
      }          // <------ tot hier
      digitalWrite(LED_PIN1, HIGH);
      digitalWrite(LED_PIN2, HIGH);
      digitalWrite(LED_PIN3, HIGH);

klikherfor at se, hvad vi har set indtil videre

For at kontrollere, om der blev trykket på den rigtige knap, brugte jeg koden nedenfor:

if(buttonState1 == LOW){       
              digitalWrite(LED_PIN1, HIGH);
              delay(250);
              buttonState = 1;
              if (1 == volgorde[aantal+1]){
                aantal = aantal+1;
              }
              else{
                aantal = lengte + 1;
                start = 1;
              }
            }

scoring

Vi vil selvfølgelig gerne se vores point, hvis vi er tabt. Denne kode viser punkterne ved hjælp af LED-flimmer.

      aantal = 1;
      
    } 
    
    if (start = 1){
      aantal = 0;
      while (aantal < lengte){
        digitalWrite(LED_PIN1, HIGH);
        delay(500);
        digitalWrite(LED_PIN1, LOW);
        delay(500);
        aantal = aantal +1;
     }
  
  }
  }
}

Dette er et eksempel, hvor jeg lavede en fejl.

den samlede kode:

const int BUTTON_PIN1 = 2;
const int BUTTON_PIN2 = 3; 
const int BUTTON_PIN3 = 4;   
const int LED_PIN1 =  5;   
const int LED_PIN2 =  6; 
const int LED_PIN3 =  7; 
long randNumber;          //<--
int buttonState1 = 0;   
int buttonState2 = 0;
int buttonState3 = 0;
int start = 0;
int volgorde[] = {};
int lengte  = 1;
int aantal = 1;
int buttonCheck = 5;
int buttonState = 0;

void setup() {
  randomSeed(analogRead(0));   //<--
  pinMode(LED_PIN1, OUTPUT);
  pinMode(LED_PIN2, OUTPUT);
  pinMode(LED_PIN3, OUTPUT);
  pinMode(BUTTON_PIN1, INPUT_PULLUP);
  pinMode(BUTTON_PIN2, INPUT_PULLUP);
  pinMode(BUTTON_PIN3, INPUT_PULLUP);
}
void loop() {
  buttonState1 = digitalRead(BUTTON_PIN1);
  if (buttonState1 == LOW) {
    digitalWrite(LED_PIN1, HIGH);
    delay(1000);
    digitalWrite(LED_PIN2, HIGH);
    delay(1000);
    digitalWrite(LED_PIN3, HIGH);
    delay(1000);
    digitalWrite(LED_PIN1, LOW);
    digitalWrite(LED_PIN2, LOW);
    digitalWrite(LED_PIN3, LOW);
    aantal = 1;
    while(start == 0){
      volgorde[lengte] = random(0,4);
      
      while (aantal < lengte){
        
        if (volgorde[aantal] == 1){
          digitalWrite(LED_PIN1, HIGH);
          delay(500);
          digitalWrite(LED_PIN1, LOW);
          delay(500);
        }
        else if (volgorde[aantal] == 2){
          digitalWrite(LED_PIN2, HIGH);
          delay(500);
          digitalWrite(LED_PIN2, LOW);
          delay(500);
        }
        else{
          digitalWrite(LED_PIN3, HIGH);
          delay(500);
          digitalWrite(LED_PIN3, LOW);
          delay(500);
        }
        aantal = aantal+1; 
      }
      aantal = 1;
      if (buttonCheck == 5){
        
        while (aantal < lengte){
            buttonState1 = digitalRead(BUTTON_PIN1);  
            buttonState2 = digitalRead(BUTTON_PIN2);
            buttonState3 = digitalRead(BUTTON_PIN3);
            
            if(buttonState1 == LOW){       
              digitalWrite(LED_PIN1, HIGH);
              delay(250);
              buttonState = 1;
              if (1 != volgorde[aantal+1]){
                aantal = aantal+1;
              }
              else{
                aantal = lengte + 1;
                start = 1;
              }
            }
            
            else if(buttonState2 == LOW){       
              digitalWrite(LED_PIN2, HIGH);
              delay(250);
              buttonState = 2;
              if (2 != volgorde[aantal+1]){
                aantal = aantal + 1;
              }
              else{
                aantal = lengte + 1;
                start = 1;
              }
            }
            
            else if(buttonState3 == LOW){        
              digitalWrite(LED_PIN3, HIGH);
              delay(250); 
              buttonState = 3;
              if (3 != volgorde[aantal+1]){
                aantal = aantal + 1;
              }
              else{
                aantal = lengte + 1;
                start = 1;
              }
            }
            else{                           
              digitalWrite(LED_PIN1, LOW); 
              digitalWrite(LED_PIN2, LOW);
              digitalWrite(LED_PIN3, LOW);
            }
           
        }
      }
      digitalWrite(LED_PIN1, HIGH);
      digitalWrite(LED_PIN2, HIGH);
      digitalWrite(LED_PIN3, HIGH);
      delay(1000);
      digitalWrite(LED_PIN1, LOW);
      digitalWrite(LED_PIN2, LOW);
      digitalWrite(LED_PIN3, LOW);
      delay(1000);
      lengte = lengte + 1;
      aantal = 1;
      
    } 
    
    if (start = 1){
      aantal = 0;
      while (aantal < lengte){
        digitalWrite(LED_PIN1, HIGH);
        delay(500);
        digitalWrite(LED_PIN1, LOW);
        delay(500);
        aantal = aantal +1;
     }
  
  }
  }
}

Forrige side 6. Programmering (2) Nuværende side 7. Programmering (3) Næste side 8. En bolig 1. Introduktion 2. Knapper 3. LED'erne 4. Ledningerne 5. Programmering (1) 6. Programmering (2) 7. Programmering (3) 8. En bolig Sendt af Ward Studerende industrividenskab

Det ultimative huskespil

Knapperne

scoring

den samlede kode:

Kommentarer